Within
Broward
(954) 467-6625
Outside Broward
1-800-866-3473
tt
Environmentally-friendly.
The preferred fire suppression system
for vital facilities that can't afford fire-related business
interruption of process controls, automated industrial operations,
robotics, etc. Active on fire, but inert on people; non-toxic when used
per NFPA Standard 2001. Safe, no-residue protection for Class A, B and C
fires. Every Kidde system
checked for design accuracy. Designed for maximum protection with
minimum hardware; less space, lower cost. UL Listed and Factory Mutual
approved.
FM-200, also
known as HFC-227ea, is a clean, gaseous agent containing no
particulates or oily residues that provides protection equal to that of
Halon 1301. The minimum design concentration of FM-200 is 7.0% by
volume, compared to 5.0% for Halon 1301. This results in about 66% more
agent by weight required compared to a typical Halon 1301 system. The
EPA has found FM-200 safe for use in occupied areas since it has a NOAEL
of 9% and a LOAEL of a least 10.5%, while its design concentration is
7%. There are no applications or use restrictions for FM-200 on the EPA
SNAP List. FM-200 is discharged within ten seconds, minimizing
non-thermal damage from smoke and particulates. The relatively high
boiling point of FM-200 reduces the danger of thermal shock to delicate
electronics that can occur from direct discharge of other agents such as
CO2.
101 South West 6th Street Fort Lauderdale, FL 33301
Local (954) 467-6625 Fax (954) 467-6640
Outside Broward County 1-800-866-3473
t
The preferred fire suppression system
for vital facilities that can't afford fire-related business
interruption of process controls, automated industrial operations,
robotics, etc. Active on fire, but inert on people; non-toxic when used
per NFPA Standard 2001. Safe, no-residue protection for Class A, B and C
fires. 
Every Kidde system
checked for design accuracy. Designed for maximum protection with
minimum hardware; less space, lower cost. UL Listed and Factory Mutual
approved.
The
EPA has found FM-200 safe for use in occupied areas since it has a NOAEL
of 9% and a LOAEL of a least 10.5%, while its design concentration is
7%. There are no applications or use restrictions for FM-200 on the EPA
SNAP List. FM-200 is discharged within ten seconds, minimizing
non-thermal damage from smoke and particulates. The relatively high
boiling point of FM-200 reduces the danger of thermal shock to delicate
electronics that can occur from direct discharge of other agents such as
CO2.
